Perfect Pools service

Pool Filter and Pump Installation in Ann Arbor, MI

New pool filters and pumps installed and started, plus pool automation for owners who want the equipment to run on a schedule instead of by hand.

Pool equipment with a sand filter, pump and plumbing

Signs Your Pool Pump or Filter Needs Replacing

The pump moves the water and the filter cleans it. When either one starts to fail, the pool tells you, usually at opening time or in the middle of July.

  • A pump that grinds, screeches or will not prime
  • Water leaking around the pump or filter housing
  • Cloudy water even when the system runs all day
  • Filter pressure that climbs right after cleaning
  • Cracked tanks or housings after a winter

Replacing a Pool Pump

A new pump has to match the pool and the plumbing it connects to. A pump that is too small will not turn the water over, and one that is too big wastes power and works the filter harder than it needs to. We size the replacement to your pool, plumb it in, and start it to make sure it primes and runs without leaks.

Choosing a Pool Filter

Residential pools mostly use one of three filter types. Each one cleans the water a different way and needs different upkeep, so the best choice depends on the pool and on how much maintenance you want to do.

Sand filters

Simple and durable. Cleaned by backwashing, with the sand changed every few seasons.

Cartridge filters

No backwashing. The cartridges come out and get rinsed, and are replaced when worn.

DE filters

Grids coated with diatomaceous earth that catch the finest particles of the three.

Adding Pool Automation

Automation lets the equipment run on a set schedule instead of being turned on and off by hand. Depending on the system, it can control the pump, lights and other equipment from a panel or a phone. It makes the most sense when the pump and filter are being replaced anyway, since everything gets set up in one visit.

Why Equipment Problems Show Up at Opening

Pumps and filters sit drained all winter, and spring start-up is the first time they run in months. A seal that dried out, a housing that held a little water and cracked, or a motor that was already tired in August tends to fail on opening day. That is also the best time to replace it, before the pool is in daily use.

Questions

Filter and Pump Installation FAQ

Can you replace just the pump and keep my filter?

Often, yes. If the filter is in good shape and matches the new pump, there is no reason to replace both.

Will you check my equipment during a spring opening?

Yes. Start-up at a pool opening is when problems with the pump and filter usually show up.

Is there water leaking around my equipment?

Drips at the pump or filter are a common leak. Leak detection covers the equipment as well as the pool and lines.

Google reviews

What Customers Say About Perfect Pools

Find Us on Google
Get in touch

Contact Us

Tell us about your pool and what it needs. Send the form and we will get back to you, or call if you would rather talk it through.

Call Us (734) 717-62389 AM to 7 PM, phone answered 24 hours2075 Ellsworth Rd, Ypsilanti, MI 48197